Instructions for installing an LTE card in an external housing (dongle)
New article: 09.2023
This article refers to a Beta version
Fig.1
Step 1: Unpack all related parts.
Fig.2
Step 2: Loosen screws and open housing.
Fig.3
Step 3: Take out the motherboard.
The golden button, to the right of the slide for the sim card, must be pressed to eject the board. When installed, this can be done with a pointy object.
The golden button, to the right of the slide for the sim card, must be pressed to eject the board. When installed, this can be done with a pointy object.
Fig.4
Step 4: Unscrew the screws on the motherboard.
Fig.5
Step 5: Slide the LTE card into the device on the left.
Fig.6
Step 6: Now tighten the screws again.
The sim card (standard format) can already be placed in the SIM card holder.
The sim card (standard format) can already be placed in the SIM card holder.
Fig.7
Step 7: Attach antenna connectors to the LTE card.
Fig.8
Step 8: Slide the motherboard into the case and screw it tight.
Fig.9
Step 9: Slide the SIM card with the SIM card holder into the slot (beveled side of the SIM card is on the front left).
Fig.10
Step 10: Remove the red caps and attach the antennas at the female SMA-connectors.
Fig.11
Step 11: The external enclosure can now be connected to the UTM via a USB port.
The device must be restarted afterwards
The device must be restarted afterwards