- Design adaptation
- Translation
Introduction
The UTM can be reset to factory settings, which will delete all configurations and stored data.
Once the device has been reset to factory settings, the data cannot be restored.
Reset to factory settings
The UTM can be reset via the web interface and via the command line interface.
Factory settings via the web interface
After logging into the administration interface of the firewall (factory default: https://192.168.175.1:11115) the factory default function is located under
Then you have to confirm the reset to factory defaults.
If the UTM should really be reset, this dialog must be confirmed with Yes.
Otherwise the process can be aborted with No.
Security query
A security prompt prevents accidental resetting.
The word Factory Defaults must be entered in the input field.
Reboot
The settings become effective only after a reboot
Factory settings via the CLI
The system can also be reset via the CLI. The CLI can be accessed directly via monitor/keyboard, serial console or SSH. There is no security query here.
As soon as the command has been issued, the system is in its factory settings.
system config factorysettings