Read PPP access data

Reading out the credentials for PPPoE or PPTP via the CLI

Last adaptation to the version: 12.6.0

New:

• Updated to Redesign of the webinterface

notempty

This article refers to a Resellerpreview

02.2023 11.7

Access: UTM-IP:Port or UTM-URL:Port
Port as configured at Network / Appliance Settings / Webserver
Default-Port: 11115
i.e.: https://utm.ttt-point.de:11115
Default: https://192.168.175.1:11115 Extras CLI

---

Reading the access data from PPP

It is not possible to read the PPP password via the graphical user interface.

However, it is possible via the CLI.

• You can access the CLI either via SSH or via the web interface using the menu item Extras CLI
• Use the command interface get to display all interface settings
• Look for the line with the type PPPoE or PPTP
• The options ppp_user and ppp_password show the DSL setup data (user and password)

Example:

[…]
wan0 |PPPOE   |DYNADDR|   |external,firewall-external,external_v6,firewall-external_v6,vpn-ipsec,firewall-vpn-ipsec,vpn-ppp|ppp_user=my_ppp_user@isp,ppp_password=my_ppp_password,pppoe_parent=eth0,ppp_lcp=1,mtu=1492|mtu=1492                                          |UP   
[…]

In this example, "my_ppp_user@isp" is the user for login and "my_ppp_password" is the associated password.