Jump to:navigation, search
Wiki





























De.png
En.png
Fr.png


































Hint
  • For reliable operation of our hardware throughout its life cycle, it must be operated within its specifications:
    • The maximum ambient temperature for operation is 40°C
    • The minimum ambient temperature for operation is 0°C
    • Relative humidity must be between 10% and 80% and condensation must be prevent
  • For installation, make sure that the firewall is mounted/set up as follows:
    • Sufficient supply of cool air
    • The device must not be covered
    • The device must be as free-standing as possible
  • When mounting in a network rack, special attention must be paid to:
    • The rack must be ventilated
    • Passively cooled devices (Black Dwarf G3+G5, RC100 G3, RC200 G3) must not be placed directly below or above heat emitting devices.
    • There must be no build-up of heat






Instructions for installation of RC300/RC400/RC1000 in a server rack (example shown with RC300)
Last adaption: 08.2022
New:
  • Added hint to the specifications
notempty
This article refers to a Resellerpreview
-


Preparation

  • 8 cage nuts and matching screws
  • Cross-head screwdriver

Instruction

Video

The mounting

Rackmontage-01.png
Step 1
  • Release the inner rail by pressing in the lock
Rackmontage-02.png
Step 2
  • Place the rail on the appliance and screw it in with the silver M4x6 screws
Rackmontage-02-1.png
Step 3
Rackmontage-03.jpg
Step 4
  • Attach the brackets to the outer rails with the black M4x4 screws
Rackmontage-04.jpg
Step 5
  • Insert the cage nuts into the server rack and fasten the rails to them
Rackmontage-04-1.jpg
Step 6
Rackmontage-05.jpg
Step 7
  • Pull out the inner rails and insert the appliance
Rackmontage-05-1.jpg
Step 8
Rackmontage-06.jpg
Step 9
  • Slide the appliance in as far as the first resistance, push in the catch, push the appliance in further and push in the catch a second time
Rackmontage-06-1.jpg
Step 10
Rackmontage-07.jpg
Step 11
  • Finally, the last lock can be released and the appliance can be pushed into the server rack
Rackmontage-07-1.jpg
Step 12