Mobile Security iOS App

---

Status reports and function of the iOS app for Securepoint Mobile Security

Last adaptation to the version: 2.2.8

New:

• Revision and update
• Layout adjusted

notempty

This article refers to a Resellerpreview

1.4

---

Introduction

Introduction

The iOS VPN app for Securepoint Mobile Security can be downloaded from the Apple App Store or automatically installed on the device via the portal in the Apps section.
The function and status displays are explained here.

---

Overview   Overview
The overview displays various information about the connection status.
Symbol	Status	Description	Internet connection and VPN tunnel active
	COPE	Device owner: Corporate owned, Personal enabled
	BYOD	Device owner: Bring-Your-Own-Device
		VPN-Tunnel active
		VPN-Tunnel inactive
		Network connection via WLAN or cellular network active
		Network connection via WLAN or cellular network inactive
Pause VPN	The VPN tunnel is interrupted for a specified period of time (1, 2, 4, 8 hours / Until tomorrow morning at 6 am).
Start VPN	Immediate re-establishment of the VPN tunnel
Stop VPN	Aborting the VPN tunnel
Running connection Running connection
Current information about the running connection is displayed here.
Active profile:	Mobile Security	Displays the active profile
Status:	Disconnected Connected	Displays the current status of the connection
Received:	17.6 KB	The amount of data received
Sent:	176.0 KB	The amount of data sent
Received per second:	0.0 KBit/s	The amount of data received per second
Sent per second:	0.0 KBit/s	The amount of data sent per second
Connection time:	hh:mm:ss	The runtime of the connection in hours:minutes:seconds
Course of time Course of time
Shows the upload and download data volume of the current connection in two diagrams. The last 5 minutes are shown at the top and the last 100 minutes at the bottom. Each point in the 5 minute diagram corresponds to the average value over 5 seconds. Each point in the 100 minutes diagram corresponds to the average value over 1 minute. As long as no connection is active, no new values are generated and the past data is displayed. As soon as a new connection is started, the new data is included in the calculation of the average values. The display therefore refers to the last 5 or 100 minutes with an active connection. Regardless of whether there were breaks during this time.
Profiles  Profiles
Manage profiles Manage profiles
All existing profiles are displayed. The button can be used to add another profile. This opens the Files app. The profiles can only be edited when the Edit button is displayed. By clicking it can be changed to Finished. Then the profiles cannot be edited. The slider next to the profile activates it   , or deactivates it . notempty A profile must always be active.			Profiles overview
Edit profile Edit profile
To edit a profile, click on the corresponding profile. The dialog for editing the profile opens.
Caption	Value	Description
Profile name:	Securepoint Mobile Security	The name of the profile
Username:	Alice	The name of the user to the VPN connection
Password:	***********	The password of the user to the VPN connection
Enable OTP		When activated    OTP is used
VPN Server	Opens the dialog VPN Server Shows the used servers with port and if TCP or UDP is used.
DNS Server	Opens the dialog DNS Server Shows the used servers with port and if TCP or UDP is used.
Redirect Gateway	IPv4 only	If    is enabled, the selected redirect gateway will be used
	IPv4 and IPv6
	IPv6 only
Excluded routes	Opens the Excluded routes dialog Displays the IP addresses and networks where no VPN connection is established
Excluded domains	Opens the Excluded domains dialog Displays the domains which are not in use
Excluded SSIDs	Opens the Excluded SSIDs dialog Displays the SSIDs that do not establish a VPN connection
MTU	1500	The size of the MTU can be set
Encryption	AES-128-CBC	Shows the set encryption
Authentication	SHA256	Shows the set authentication
Reconnection time	5	The time after a connection is lost during which the connection is re-established
Maximum connection attempts	12	The maximum number of attempts to re-establish the connection after a termination.
Certification authority	CN: Securepoint Mobile Security EMail:support@securepoint.de	Displays the content of the certificate used
Certificate	CN=********	The certificate used
Key	*******	The key used
Verbosity	No selection 0 to 5	The log level is set
Connect if required		Connect if required
Save	The changes made are saved
Back	The program returns to the previous dialog. A warning window appears if changes have not yet been saved.
Notifications  Notifications
Notifications Notifications
Notifications about the VPN connection are displayed here.
Symbol	Description
	No error present. The VPN connection is established and the device uses it.
	An error has occurred or the VPN connection is disconnected. A corresponding message appears.
More  More
Settings  Settings
Caption	Value	Description
Exclude connected WLAN from VPN	Default	When    is activated, the currently connected WLAN is excluded from the VPN
Enables automatic reconnection after the device wakes up from sleep mode	Default	When activated   , the VPN connection is resumed, after the device wakes up from sleep mode.
Diagnosis  Diagnosis
Logging
Diagnostic report	The Open button opens the Logging dialog.
	Activate logging	When activated    logging is enabled
	Devices Info	Opens a dialog with information about the device
	Full log	Opens the dialog with all log messages
		Opens a window for a support ticket
		Opens a window with a security question whether all entries should be deleted
Active profile:	Displays the active profile
Internet connection:	Displays the connection to the Internet
Server reachability	The Test button is used to test the reachability of the VPN Server in use. The VPN connection is briefly interrupted for this purpose.
Server name resolution	Displays the test result. Not tested No test has been performed yet.  Successful test. The name resolution of the server works without errors.   Failed test. An error occurred during the name resolution of the server.
Server reachability	Displays the test result. Not Tested No test has been performed yet.  Successful test. The server is reachable.  Failed test. The server is not reachable.
Virtual Private Network	The Test button tests the VPN connection.
Connection	Displays the test result. Not Tested No test has been performed yet.  Successful test. The VPN connection works without errors.  Failed test. There is an error with the VPN connection.
Information and action instructions based on the last connection test:	Displays a log message about the last VPN connection test. If an error occurred, a corresponding instruction is displayed to solve this problem.
Check public IP	The Test button displays the public IP address of the device.
Your IP is:	**********	The public IPv4/IPv6 address of the device
Privacy policy
Privacy policy	Displays the privacy policy.
Imprint
Imprint	Displays the imprint with contact details.
EULA
EULA	Displays the end user agreement.
Licenses
Licenses	Displays the licenses of the opensource programs used.
Help
Help	Displays the FAQs.