notempty
- Additional Generation 5 devices:
- in the Black Dwarf series
- RC100
- RC200
Preamble
Due to the constant technical development and the addition of new features, with which Securepoint asserts itself against current and future threats, the demands on the hardware to be used of Securepoint NextGen UTM are obviously increasing.
The possibility that hardware used in 24/7 operation could fail after many years of use is of course higher than with new hardware.
As a precaution and to maintain the availability of required services, it is advisable to replace hardware at the end of the guarantee period .
Securepoint also offers you the option "Protection Plus" to keep downtime at your customers as low as possible.
Only the hardware provided by us or one of the virtualization environments released by us should be used to operate Securepoint NextGen UTM.
We recommend the use on your own hardware only in combination with a virtualization solution approved by us. Installations on third-party hardware cannot be supported by our technical support.
System requirements
Supported Hardware
The following minimum requirements must be achieved in order to use the current UTM software.
- CPU: min. 1GHz (If only 1 core is available, only the Cyren virus scanner is activated instead of 2 independent virus scanners for performance reasons.)
- RAM: min. 1GB (If only 1 core is available, only the Cyren virus scanner is activated instead of 2 independent virus scanners for performance reasons.)
- Hard disk (system): min. 4GB
It is not possible to install version 12 on Generation 1 devices.
The system will not boot under v12 due to lack of 64-bit support.
Operation under v11 may be possible with Generation 1 devices, but is not recommended and not supported.
| Device type | Version 1 + 2 | Gen. 1 - 2010 | Gen. 2 - 2012 | Gen. 3/4 - 2017 | Gen. 5 - 2021/2022 |
|---|---|---|---|---|---|
| Black Dwarf ⋆ including variants: UTM / SB / VPN / WiFi |
/
|
Not possible with v12 |
|||
| Black Dwarf Pro | /
|
/
|
/
|
/
|
|
| Piranja | Not possible with v12 |
/
|
/
| ||
| RC100 | Not possible with v12 |
||||
| RC200 | Not possible with v12 |
||||
| RC300 | Not possible with v12 |
/
| |||
| RC300S | /
|
/
|
/
|
/
|
|
| RC340 (Special edition 04.2020) | /
|
/
|
/
|
/
| |
| RC350R | /
|
/
|
/
|
/
|
|
| RC400 / RC400R | /
|
/
|
|||
| RC700 | /
|
/
|
/
|
/
| |
| RC1000 | /
|
/
|
/
| ||
| RC1000R | /
|
/
|
/
|
/
|
⋆ Black Dwarf Generation 2 and 3/4 only have 1 core. For performance reasons, only the Cyren virus scanner is activated here.
Authorized
Not possible with v12
Not authorized
/
Hardware not available
Supported Hypervisors
Securepoint NextGen UTM v11.8 currently supports the following virtualization environments:
- Microsoft Hyper-V
- VMWare vSphere
- KVM-based system (Linux kernel from 2.6.20) New from 11.8
Only the current ISO image from the Securepoint reseller portal (https://my.securepoint.de) should be used as the installation medium.
Dimensioning virtual systems
The values should be used as a guide and adjusted if necessary.
Up to 10 users
- CPU: mind. 1GHz (2 Core)
- RAM: mind. 4GB
- Harddisk: mind. 20GB
Up to 50 users
- CPU: mind. 2GHz (4Cores)
- RAM: mind. 4GB
- Harddisk: mind. 30GB
Up to 150 users
- CPU: mind. 3GHz (2Cores)
- RAM: mind. 4GB
- Harddisk: mind. 60GB
150 users or more
- CPU: mind. 3GHz (4Cores)
- RAM: mind. 16GB
- Harddisk: mind. 80GB (SSD oder SSD-Caching)
- Weitere Funktionen: Hardwarebeschleunigung für AES
Advice
Appliance / Hardware Generation 3 (2017)
Generation 3 hardware must be installed with at least version 11.6.12 or higher.
The latest version (at least 12.6.2) should always be installed.