Howto-Multipath Routing english checklist

Checklist Multipathrouting

In this checklist you can see all settings you have to work off, if you set up a multipath-routing. There are only shown the important steps, for the detailled tutorial you have to read the full tutorial Howto-Multipath_Routing_english.

Network Configuration

ppp0 and ppp1 in different zones

1. Add ppp interfaces
2. :""Note:"" Don't set the "default Route".
3. :""Note:"" Don't set zones twice.

Netzwerk Objects

Add network objects

1. Add network objects
   • Add secound network object for the internet ("Internet2").
   • Add secound network object for the external interface ("external-interface2").

   Note: The zone of the external-interface2 is the same as the DMZx.

Hide-NAT

Hide-NAT rules for both interfaces.

1. Add hide-NAT

   Note: You have to add a hide-NAT rule for every network behind the firewall per interface.

Routing

add default routes and weighting

1. Routing and weighting
   • You have to set a default route for every connection.
   • Set the weihting.
   • If you are using a high avaiability configuration, you have to set the weighting to 0.

Bind Services and Clients to a connection

Source routing for a fixed service.

In the field "Rule Rouing" you have to set an interface

1. Source Routing
   • Set a route for a client or a network.

   Note: The whole data traffic will be routed over one connection.

   
   
   
   
   
   
   
   
   
   
   
   
   
   

2. Rule Routing
   • Add a rule routing-rule in the portfilter.

VPN

Bind IPSec to an interface

Bind L2TP to an interface

1. The IPSec connections will be bound on an interface
   • 'Local Gateway pppx
   • Route over
   • Local Gateway ID pppx

   
   
   
   
   
   
   
   
   
   
   
   
   

2. Bind L2TP connections to an interface (global)
   • Bind on an interface