Allows the user to temporary disable the VPN-Connection
If not activated manually, the VPN will resume at a time chosen by the user
Allow other VPN profiles
Allows adding other VPN profiles in addition to the security profile
Authentication required after app start
notempty
New as of 2.1
Requirement for this feature: App version 3.1
If activated, authentication (PIN or biometric) is required when starting the app
This must be set by the user
Activate security
To be able to use Mobile Security, the Securepoint VPN Client app is first installed automatically
This requires either a VPP license from the Apple Business Manager or an Apple ID on the device
A corresponding message will be displayed if no VPP license is available: To use the Security / VPN feature, you need a VPP license for the Securepoint VPn Client app from Apple Business Manager
If Cloud Shield is active, security cannot be enabled at the same time
notempty
New as of: 2.3
Protocol
TCP
Protocol used for VPN tunnel: TCP or UDP
Portfilter Type
Open
Filter network traffic based on network ports:
all ports are open
Closed
Only port 80 (http) and 443 (https) are enabled
Selection
Port filter rule selection: Specify which port collections are open for network traffic:
Show Port Collections
Hide Port-Collections
Klicken für dauerhafte Anzeige
Port-Collection
Port
Protocol
Application
Administrative Tools
21
TCP
ftp
3389
TCP
ms-rdp
23
TCP
telnet
5900
TCP
vnc
22
TCP
ssh
5938
TCP/UDP
teamviewer
Communication
3478-3481
UDP
Skype
49152-65535
UDP
49152-65535
TCP
5222
TCP
Google Push-Notifications
5223
UDP
5228
TCP
VOIP
5060
UDP
SIP/RTP
7070-7089
UDP
VPN
1194
TCP
OpenVPN
1194
UDP
500
UDP
IPSec
4500
UDP & ESP
1701
UDP
L2TP
Mail
25
TCP
smtp
587
TCP
465
TCP
smtps
110
TCP
pop3
995
TCP
143
TCP
imap
993
TCP
SSL interception
Default
Defines whether or not to intercept SSL traffic
The default value is to intercept traffic based on content filter response
Content-Filter Allowlist
Add entries
Click box: Web pages that are to be added to a allowlist
Click box: Websites that are to be added to a blocklist
Disable for SSIDs
Add SSIDs
Enter WLAN SSIDs for which the security features shall be disabled
Disable for IP addresses
Add IPs
IP addresses or networks can be entered for which the security functions are to be deactivated, i.e. the individual host 192.0.2.192/32 or the entire subnet 192.0.2.0/24
For address blocks with less than three digits, a dot must be entered or navigated within the mask using the cursor keys
Exclude local WLAN from VPN
If enabled, a route is added that excludes the local WLAN IP range from the tunnel
