Jump to:navigation, search
Wiki

Installation wizard

From Securepoint Wiki





























In dieser Seite werden die Variablen für unterschiedliche Sprachen definiert.
Diese Seite wird auf folgenden Seiten eingebunden






















































































































Achtung: In der .lang-Datei werden je nach Parameter hw Varaiblen gesetzt für die Bezeichnung der Schnittstellen und ob dmz / dmz interface und wlan vorhanden sind
















Setting up a UTM with the installation wizard

Last adaptation to the version: 14.2.0  (06.2026)

New:
  • Beta For participants on the Beta Channel only:
  • Step 2 has been renamed from "Privacy" to "Security Settings" and has gained additional functions
  • Step3, Step 6 and Step 7 were expanded to include the option of auto-generated rules
  • The provider's DNS server is used by default for PPPoE and cable modem connections
Last updated: 
    06.2026
  • Link path updated
notempty
This article refers to a Beta version

12.7 12.5.1 12.5 12.2.3 12.2 11.6

Access: UTM-IP:Port or UTM-URL:Port
Port as configured at Network / Appliance Settings / Webserver
Default-Port: 11115
i.e.: https://utm.ttt-point.de:11115
Default: https://192.168.175.1:11115 Configuration Area Installation wizard

Prefaces

  • Usually, the installation wizard appears during the initial setup of the UTM.
    This checks whether a configuration already exists that is marked as the boot configuration. (Status )
    If this is not the case, the wizard opens automatically.
  • It is not advisable to start the installation wizard later, as other settings made in the meantime may be overwritten.


Installation wizard

Step 1 - General

Caption Value Description Installation wizard UTMuser@firewall.name.fqdn Configuration management
Step 1
Firewall Name: firewall.ttt-point.local This is about how the UTM responds to requests.
For example, if the mail relay is to be used, it may be useful to enter the Fully Qualified Domain Name (FQDN) of the mail exchange (MX) here so that other mail servers can match it via the reverse resolution of the PTR Resource Record (PTR).
  • This setting is not about the name under which the UTM is listed in an active directory domain.
    This setting is made in the Authentication → AD/LDAP Authentication → tab Settings Appliance Account entry.
    • Global contact person: Alina Admin In this field, the name of the administrator or the organization is entered, which is later specified in the UTM error messages for questions.
    Global email address: admin@ttt-point.de Important system messages are sent to this email address.
    Language of reports: German
    English    		 Language in which the reports and system messages are sent

    Step 2 - Security settings

    Anonymize all applications: Yes When activated (default), the appliance's applications are anonymized in accordance with the GDPR.
    Under Authentication Information privacy anonymization can also be activated individually for each application.
  • Should be disabled for debugging only.
    		•
    Step 2
    Threat Intelligence Filter Deactivated Deaktiviert die Threat Intelligence Filter Funktion, die alle Verbindungen überwacht
    Log connection Alle Verbindungen werden in den Logs protokolliert
    Log and drop connection Alle Verbindungen werden in den Logs protokolliert und bei Gefahr blockiert
    GeoIP: On Ermöglicht das Erstellen von Regeln über die geographische Verteilung von IP-Adressen
    System-wide dropped sources:
    notempty
    New as of v14.2.0
    		 BX (Any) Wenn GeoIP aktiviert ist, können hier die Länder ausgewählt werden, mit denen der Datenverkehr verboten sein soll

    Step 3 - Internal

    Internal firewall IP address: 192.168.175.1/24 The IP address of the internal interface (A1) as well as the subnet mask (as CIDR-notation) for the internal network.
    Step 3 - without WLAN module
    Autogenerated rules:
    notempty
    New as of v14.2.0
    		 On Port filtering rules can be automatically created for this network, allowing traffic to the Internet on the interface to the external interface (A0).
    Likewise, rules are created that also allow traffic from the internal network into the DMZ network.
    What rule set should be generated?
    notempty
    New as of v14.2.0
    		 Allow special service from "internal" to the "internet" Ermöglicht die Auswahl von speziellen Diensten, die frei zwischen dem internen Netzwerk und dem Internet kommunizieren können sollen
    Allow full access from "internal" to "Internet" Erlaubt jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Reject access from "internal" to "Internet" Blockiert jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Selection of the service group:
    notempty
    New as of v14.2.0

    Displayed when Special service is selected    		 default-internet Wenn der Regelsatz "Spezieller Dienst" ausgewählt ist, kann einer der folgenden Dienste ausgewählt werden
    Dienste anzeigen
    Dienste ausblenden
    Klicken für dauerhafte Anzeige
    • default-internet
    • proxy
    • netbios
    • dns
    • radius
    • administration
    • windows-domain
    • ipsec
    • ssl-vpn
    • voip
    • network-time
    • pptp-gre
    • sp-backup
    Dynamically assign Client IP Addresses via DHCP: No When enabled Yes, the UTM works as a DHCP server: All clients in the internal network receive an IP address via DHCP. This sets the UTM as the default gateway and DNS server for the clients.
    Router Advertisement: Off If the UTM has received an IPv6 prefix, it can advertise the subnet via router advertisement in the network segment behind the interface. (See article IPv6 Prefix Delegation)
    Internal firewall IP address: 192.168.175.1/24 The IP address of the internal interface (A1) as well as the subnet mask (as CIDR-notation) for the internal network.
    Step 3 - with WLAN module
    Dynamically assign Client IP Addresses via DHCP: No When enabled Yes, the UTM works as a DHCP server: All clients in the internal network receive an IP address via DHCP. This sets the UTM as the default gateway and DNS server for the clients.
    Autogenerated rules:
    notempty
    New as of v14.2.0
    		 On Port filtering rules can be automatically created for this network, allowing traffic to the Internet on the interface to the external interface (A0).
    Likewise, rules are created that also allow traffic from the internal network into the DMZ network.
    What rule set should be generated?
    notempty
    New as of v14.2.0
    		 Allow special service from "internal" to the "internet" Ermöglicht die Auswahl von speziellen Diensten, die frei zwischen dem internen Netzwerk und dem Internet kommunizieren können sollen
    Allow full access from "internal" to "Internet" Erlaubt jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Reject access from "internal" to "Internet" Blockiert jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Selection of the service group:
    notempty
    New as of v14.2.0

    Displayed when Special service is selected    		 default-internet Wenn der Regelsatz "Spezieller Dienst" ausgewählt ist, kann einer der folgenden Dienste ausgewählt werden
    Dienste anzeigen
    Dienste ausblenden
    Klicken für dauerhafte Anzeige
    • default-internet
    • proxy
    • netbios
    • dns
    • radius
    • administration
    • windows-domain
    • ipsec
    • ssl-vpn
    • voip
    • network-time
    • pptp-gre
    • sp-backup
    Generate WLAN Bridge: No
    Default    		 Creates a bridge so that this network and the WLAN are on the same network.
    Generate packet filter rule:
    Shown when Generate WLAN Bridge is enabled    		 No When activated, a packet filter rule is automatically generated
    STP:
    Shown when Generate WLAN Bridge is enabled    		 Off When activated, STP (Spanning Tree Protocol) is used
    STP Bridge Priority:
    Shown when Generate WLAN Bridge is enabled    		 32768
    Default    		 The priority of the STP Bridge is set

    Step 4 - Internet

    This is where the Internet connection is configured on the external interface (A0).
    The following variations are available:

    Connection type PPPoE / VDSL
    Connection type: PPPoE / VDSL
    With this type, an ADSL or SDSL modem is connected to the external interface (A0). The connection is initiated by the UTM.
  • A router can only be used with this connection type if it can be set to modem mode and it can be guaranteed that the UTM will initiate the connection.
    • Username: (Shares ISP) The login information is provided by the ISP (Internet Service Provider).
    Step 4 with PPPoE / VDSL
    Password: (Shares ISP)
    PPPoE for VDSL/fiber optics: Off Check the box if PPPoE is connected via a VDSL modem or via fibre.
    VLAN ID:
    Shown when PPPoE for VDSL/fiber optics is enabled    		 7 The VLAN ID is usually specified by the network operator
    IPv6 Prefix Delegation: Off Allows an IPv6 network assigned by the Internet Service Provider to be split into /64 networks and assigned to individual interfaces via Router Advertisement.
    Example:
    Network assigned by ISP:
     2001:0db8:aaaa:bb::/56
    Networks distributed at internal interfaces via router adviertisement:
     2001:0db8:aaaa:bb00::/64
     2001:0db8:aaaa:bb01::/64
    Connection type Ethernet with static IP
    Connection type:Ethernet with static IP
    With this connection type, a router is connected to the external interface (A0), which itself initiates the connection to the Internet. The login information of the provider is stored in the preceding router and not on the UTM.
  • This connection type cannot be used with a modem or router in modem mode.
    • External IP address: 192.168.178.101/24 The IP address of the external interface (A0) and the IP address range for the external network (subnet mask in CIDR notation). The default is an already existing IP address, if applicable.
    The external interface receives an IP address via DHCP by default, provided a DHCP server is available in the external network.
    Step 4 with Ethernet with static IP
    Default Gateway: 192.168.178.1/---  IP address of the default gateway for the UTM so that it knows which is the closest router for all networks that are not on an internal interface: As a rule: the Internet.
    IPv6 Prefix Delegation: Off Allows an IPv6 network assigned by the Internet Service Provider to be split into /64 networks and assigned to individual interfaces via Router Advertisement.
    Example:
    Network assigned by ISP:
     2001:0db8:aaaa:bb::/56
    Networks distributed at internal interfaces via router adviertisement:
     2001:0db8:aaaa:bb00::/64
     2001:0db8:aaaa:bb01::/64
    Connection type Cable modem with DHCP
    Connection type: Cable modem with DHCP
    e.g.: DSL connection via telephone line with Fritzbox or Speedport router.
    Originally mostly devices that cable providers provided to their customers.
    Also with this connection type, a router is connected to the external interface (A0), which itself initiates the connection to the Internet. The login information of the provider is stored in the preceding router and not on the UTM.
  • This connection type cannot be used with a modem or router in modem mode.
    		•
    Step 4 with cable modem with DHCP
    DHCP Client: IPv4 Selection with which protocol the interface receives IP addresses from the preceding router with DHCP server.
    IPv6
    IPv4 & IPv6
    Use the provider's DNS server: Off When activated, the provider's DNS server is used.
    IPv6 Prefix Delegation: Off Allows an IPv6 network assigned by the Internet Service Provider to be split into /64 networks and assigned to individual interfaces via Router Advertisement.
    Example:
    Network assigned by ISP:
     2001:0db8:aaaa:bb::/56
    Networks distributed at internal interfaces via router adviertisement:
     2001:0db8:aaaa:bb00::/64
     2001:0db8:aaaa:bb01::/64
    Connection type LTE / others
    Connection type: LTE / others
    LTE connections or other connections are configured after the installation wizard is completed

    Step 5 - DNS Forwarding

    The DNS forwarding of the name server can be configured here. There are the same options as under Network Nameserver Area DNS Forwarding
    Up to version 14.1.x found under Applications Nameserver
    . For more detailed information, see the Nameserver article.
    Add DNS Forwarding DNSDoT Adds DNS Forwarding.
    It is possible to select classic DNS or DNS over TLS (DoT). Further information in the Article on DNS forwarding in the nameserver.

    Add DNS Forwarding UTMuser@firewall.name.fqdn Configuration management Installation wizard
    Step 5
    Use the provider's DNS server: On When activated, the provider's DNS server is used.
    notempty
    New: Selected by default for PPPoE and cable modem

    Step 6 - DMZ

    Configuration of a second internal network, often referred as Demilitarized Zone: Usually a network that is separate from the internal network.
    In the UTM, all networks are separated from each other by default.

    DMZ IP address: 192.168.176.1/24 The IP address of the interface A2 and the subnet mask (as CIDR notation) for the DMZ network.
    Step 6 without WLAN
    Assign the IP addresses to the clients in this network via DHCP: No When enabled Yes, the UTM works as a DHCP server: All clients in the DMZ network receive an IP address via DHCP. This sets the UTM as the default gateway and DNS server for the clients.
    Autogenerated rules: No Port filtering rules can be automatically created for this network, allowing traffic to the Internet on the interface to the external interface (A0).
    Likewise, rules are created that also allow traffic from the internal network into the DMZ network.
  • These rules release all from this network to the Internet and other internal networks.
    notempty
    These any rules are intended for testing purposes and should be disabled and replaced with well-defined rules in production mode.
    • What rule set should be generated?
    notempty
    New as of v14.2.0

    Displayed when Autogenerated rules is active    		 Allow special service from "internal" to the "internet" Ermöglicht die Auswahl von speziellen Diensten, die frei zwischen dem internen Netzwerk und dem Internet kommunizieren können sollen
    Allow full access from "internal" to "Internet" Erlaubt jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Reject access from "internal" to "Internet" Blockiert jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Selection of the service group:
    notempty
    New as of v14.2.0

    Displayed when Special service is selected    		 default-internet Wenn der Regelsatz "Spezieller Dienst" ausgewählt ist, kann einer der folgenden Dienste ausgewählt werden
    Dienste anzeigen
    Dienste ausblenden
    Klicken für dauerhafte Anzeige
    • default-internet
    • proxy
    • netbios
    • dns
    • radius
    • administration
    • windows-domain
    • ipsec
    • ssl-vpn
    • voip
    • network-time
    • pptp-gre
    • sp-backup
    Router Advertisement: No If the UTM has received an IPv6 prefix, it can advertise the subnet via router advertisement in the network segment behind the interface. (See article IPv6 Prefix Delegation)
    Generate WLAN Bridge:
    notempty
    New in the wiki v14.2.0

    Only if a WLAN module is present    		 No Creates a bridge so that this network and the WLAN are on the same network.
    Generate packet filter rule:
    notempty
    New in the wiki

    Shown when Generate WLAN Bridge is enabled    		 No When activated, a packet filter rule is automatically generated
    STP:
    notempty
    New in the wiki

    Shown when Generate WLAN Bridge is enabled    		 Off When activated, STP (Spanning Tree Protocol) is used
    STP Bridge Priority:
    notempty
    New in the wiki

    Shown when Generate WLAN Bridge is enabled    		 32768
    Default    		 The priority of the STP Bridge is set

    Step 7 - WLAN

    The RC1000R (G5) model has no WLAN option.
    This step is therefore skipped.

  • A separate license is required for the permanent use of WLAN (>30 days) for devices up to G3/G4
  • For devices from G5 the use of WLAN is already included in the license
    • WLAN IP address:
    Not in bridge mode    		 192.168.177.1/24 The IP address of the WLAN interface (wlan0) and the subnet mask (as CIDR notation) for the WLAN network.
    In bridge mode, the setting from the internal network in which bridge mode was activated is used here.
    Step 7: WLAN dialog without bridge configuration

    Step 7: WLAN dialog when using a bridge
    Country code: DE The country code is used to determine which frequencies and which signal strengths may be used.
    The frequencies used and the transmission power can be found in a Wikipedia article.
    SSID: TTT-POINT The Service Set Identifier (SSID) is the name under which the WLAN network is presented to the clients. This must be entered in any case.
    SSID Broadcast: On This option can be used to define whether the WLAN network can be seen by every client or whether the transmission of the SSID should be suppressed. (Off)
    Security Mode: WPA Is considered unsafe and only exists for backwards compatibility. (TKIP is used as encryption method)
    WPA2 Standard with enhanced security
    AES128 is used as encryption method: https://en.wikipedia.org/wiki/WPA2
    WPA3 Standard with highest available level of security
    AES256 and SAE are used as encryption methodes: https://en.wikipedia.org/wiki/WPA3
    Pre-Shared Key: Don'tcopythis:Ei)#W~X$… The base station and mobile device must have the same PSK (≙password). The security of the encryption depends directly on the length and complexity of the PSK!
  • Short or easily guessed PSKs compromise network security.
    • Automatically generates a very strong PSK
    Assign the IP addresses to the clients in this network via DHCP:
    Not in bridge mode    		 Off When enabled, the UTM works as a DHCP server: All clients in the WLAN network receive an IP address via DHCP. This sets the UTM as the default gateway and DNS server for the clients.
    In bridge mode, the setting from the internal network in which bridge mode was activated is used here.
    Router Advertisement: No If the UTM has received an IPv6 prefix, it can advertise the subnet via router advertisement in the network segment behind the interface. (See article IPv6 Prefix Delegation)
    Generate rules for Internet access:
    Not in bridge mode    		 Off Port filtering rules can be automatically created for this network, allowing traffic to the Internet on the interface to the external interface (A0). Likewise, rules are created that also allow data traffic from the internal network into the WLAN network.
  • These rules release all from this network to the Internet and other internal networks.
    notempty
    These any rules are intended for testing purposes and should be disabled and replaced with well-defined rules in production mode.

    • In bridge mode, the setting from the internal network in which bridge mode was activated is used here.
    What rule set should be generated?
    notempty
    New as of v14.2.0

    Displayed when Generate rules for the Internet access is active    		 Allow special service from "internal" to the "internet" Ermöglicht die Auswahl von speziellen Diensten, die frei zwischen dem internen Netzwerk und dem Internet kommunizieren können sollen
    Allow full access from "internal" to "Internet" Erlaubt jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Reject access from "internal" to "Internet" Blockiert jeglichen Verkehr zwischen dem internen Netzwerk und dem Internet
    Selection of the service group:
    notempty
    New as of v14.2.0

    Displayed when Special service is selected    		 default-internet Wenn der Regelsatz "Spezieller Dienst" ausgewählt ist, kann einer der folgenden Dienste ausgewählt werden
    Dienste anzeigen
    Dienste ausblenden
    Klicken für dauerhafte Anzeige
    • default-internet
    • proxy
    • netbios
    • dns
    • radius
    • administration
    • windows-domain
    • ipsec
    • ssl-vpn
    • voip
    • network-time
    • pptp-gre
    • sp-backup

    Step 8 - Certificate

    Generate CA and server certificate: Yes
    Default    		 If Yes is enabled, a CA and server certificate will be generated.
  • The boxes Country, Organization and Department are preset depending on the license entered, but can also be changed here.
    		•
    Step 8
    Key length: 3072 Select the bit length of the key
    Valid since: 2024/01/01 00:00:00
    Valid until: 2037/12/31 23:59:59
    Country: DE Detailed information is used to identify who issued the certificate
    State: Lower Saxony
    Organization: TTT Point
    Department: Support
    Email address: admin@ttt-point.de

    Step 9 - Administrator

    User admin The username admin cannot be changed at this point
    Step 9
    Password: ••••••••••••••

































    Passwords must meet the following criteria:
    • at least 8 characters length
    • at least 3 of the following categories:
      • Upper case
      • Lower case
      • Special characters
      • Digits
    Confirm password: ••••••••••••••
    Done
    • The wizard is being completed
    • A new configuration is created with the name configuration-wizard-date-time
    • This configuration is set as the boot configuration
    • This configuration is set as the current configuration

    Reboot

    Restart

    Do you want to reboot the system now? Yes In order for the configuration changes to be applied, the respective services must be restarted in the correct order.
    This is achieved by a reboot of the device.
    notempty
    If your own IP address was changed to reach the admin interface of the UTM and the default was changed in Step 3 - Internal, the internal interface of the UTM is now located in this network.
    For further configuration, the IP address of your own computer must then be changed again.
    See the [1]

    Configure interfaces

    Do you want to configure the interfaces now? Yes No This message appears if not all existing interfaces are configured correctly. However, it is recommended to do this to prevent possible problems. The Yes button opens the network configuration directly.
    Do not ask again Off If this message is not desired, it can be set here so that it is not displayed again the next time you log in.
    Retrieved from "https://wiki.securepoint.de/index.php?title=UTM/CONFIG/Installationsassistent-G5-RC1000R&oldid=101740"