Mobile Settings

notempty

Dieser Artikel bezieht sich auf eine nicht mehr aktuelle Version!

notempty

Der Artikel für die neueste Version steht hier

notempty

Zu diesem Artikel gibt es bereits eine neuere Version, die sich allerdings auf eine Beta-Version bezieht

Mobile Settings on the UTM

Last adaptation to the version: 03.2023 12.3

New:

• Updated layout

notempty

This article refers to a Beta version

11.7 11.6.11

---

The Mobile Interface

Under Network a UMTS or LTE interface can be configured.
The mode used depends on the modem, the setup does not differ.

• The upgrade kit for the UMTS or LTE function can be obtained later for the Black Dwarf, the RC100 and the RC200.
• On request, it is also possible for the UMTS or LTE module to be installed before delivery.

• The devices or the upgrade kits are to be obtained exclusively from Securepoint or Wortmann AG.
  Foreign products are not supported.
• Detailed instructions for retrofitting can be found here. Installation Upgradekit

Please note that after a crash of the modem, the device must be completely unpowered for several minutes so that it can successfully re-dial.

Available modules

Name	Manufacturer	Function
MC7304	Sierra Wireless Incorporated	LTE Modem
EM770W	Huawei	UMTS Modem
	Qualcomm	LTE Modem

Add mobile interface

The Mobile interface is configured under → Network →Network ConfigurationTab Mobile Button Mobile . The setup wizard for the Mobile interface opens.	Add mobile interface
Setup step 1	Setup Wizard: Step 1
Setup step 2 The module to be configured is selected.	Setup Wizard: Step 2
Setup step 3 The zones must be placed on the interface. If the mobile interface should be used as an Internet connection, the zones external and firewall-external are required here. New zones can also be created. No zones are required for a fallback interface.	Setup Wizard: Step 3
Manage SIM Unlock SIM The SIM card can be activated by clicking on the lock icon and entering the PIN.	SIM cards unlocking
Remove SIM PIN The PIN of a SIM can only be removed via SSH and with a root user. Display modem: mmcli -L Display path to SIM: mmcli -m "MODEM-NUMBER" Disable PIN query: mmcli -i "PATH-TO-SIM" --pin="PIN" --disable-pin
Provider selection After the SIM has been unlocked, the connection can be edited and the provider selected. The carriers differ by the respective APN. An overview of the most commonly used providers can be found here: Mobile Provider	Provider configuration step 1 Provider configuration step 2
Add route A default route via the mobile interface (wwan0) is required so that a connection to the Internet can be established via the mobile interface. The configuration of a default route can be found here Configure default route . The setup of the Mobile connection is now complete.
Signal quality The signal quality can be read out under → Network →Network configurationTab Mobile. The signal quality is specified as a percentage.	LTE signal with LTE modem HSPA signal with UMTS modem