Create Default Route

In dieser Seite werden die Variablen für unterschiedliche Sprachen definiert.
Diese Seite wird auf folgenden Seiten eingebunden

• UTM/NET/Ethernet (transclusion) (← links)
• UTM/NET/PPPoE (transclusion) (← links)
• UTM/NET/Ethernet v12.6.0 (transclusion) (← links)

---

Create default routes for connections on the Securepoint UTM

New article with version: 12.7.0

notempty

This article refers to a Beta version

-

Access: UTM-IP:Port or UTM-URL:Port
Port as configured at Network / Appliance Settings / Webserver
Default-Port: 11115
i.e.: https://utm.ttt-point.de:11115
Default: https://192.168.175.1:11115 Network Network Configuration  Area Routing button Add Default-Route

---

Create default route

A default route must be created for this connection: Network Network Configuration  Area Routing button Add Default Route
Gateway Type Interface Gateway Type: Interface
Caption	Value	Description	Add Default-Route UTMuser@firewall.name.fqdnNetworkNetwork configuration Create default route
Gateway:	wan0	Select the desired interface.
Dialog Save and close
Default route for IPv4. If necessary, another default route for IPv6 must be created.			Network configuration UTMuser@firewall.name.fqdnNetwork Routing with PPPoE
Gateway Type IP Gateway Type: IP
Caption	Value	Description	Add Default-Route UTMuser@firewall.name.fqdnNetworkNetwork configuration Create default route
Gateway:	fe80:1234::1/---	IP address of the gateway. If a Link Local IPv6 is recognised, the "Interface" button is displayed and an interface must be selected.
Interface: Only for link local IPv6	LAN1	Interface via which the IP address can be accessed.
Dialog Save and close
Default route for IPv6. If necessary, another default route for IPv4 must be created.			Network configuration UTMuser@firewall.name.fqdnNetwork Routing with PPPoE